Titebond Polyuretaani liima 237ml

23,00EUR

Titebond Polyurethane Glue Titebond Polyurethane Glue is a breakthrough in adhesive technology. It is the only polyurethane glue to combine a long 30-minute working time with a short 45-minute clamp time*. It is a versatile, professional-strength glue specifically formulated for multi-purpose applications. In addition to its superior wood-to-wood performance, Titebond Polyurethane Glue is ideal for metals, ceramics, most plastics, HPL, Corian®, stone and other porous/non-porous materials. It is ready-to-use, offers excellent sandability and is unaffected by finishes. Features: ◾100% waterproof (Passes ANSI Type I & II water-resistance testing) ◾Bonds virtually everything ◾Epoxy-like strength - No mixing ◾Short clamp & fast cure ◾Excellent sandability ◾100% solids ◾Solvent free Properties: ◾Type: Polyurethane ◾Color: Brown ◾Dried Film: Yellow ◾Storage Life: 12 months in tightly closed containers at 23°C Application Guidelines: ◾Application Temperature: Above 10°C. ◾Assembly Time After Glue Application: 25-30 minutes (21°C / 50%RH) ◾Minimum Required Spread: Approximately 6 mils or 250 square feet per gallon ◾Required Clamping Pressure: Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods). ◾Method of Application: Easily spread with a roller, spreader or brush. *NOTE: This product cures by reaction with moisture (humidity in the air and the materials you will glue). Changes in humidity, temperature and moisture content of the glued surfaces will affect open time and minimum clamp time. Maximum open time can be determined by excessive foam development in the adhesive. Minimum clamp time can be determined when squeeze out of adhesive becomes firm. ◾Cleanup: Mineral spirits while glue is wet. Scrape or sand off dried excess. Limitations: Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 10°C. Lower temperatures will cause the glue to thicken.

Lisää koriin:

  • Malli: TITR2303
  • Valmistaja: Great Planes